Several methods for controlling the flow of submersible pumps

For the use of submersible pumps, we are mainly drainage, then I believe that many of the control of the water output and water flow are not understood, and then explain the various adjustment methods of the water flow control of the submersible pump.
1. Variable speed adjustment. Changing the speed of the submersible pump can change the performance of the pump, thus changing the operating point of the pump. This method is called variable speed mediation.
2. Reducer adjustment. After the impeller is turned, the performance of the pump will change according to a certain law, so that the operating point of the pump changes. The method by which the turning impeller changes the operating point of the pump is called the variable diameter adjustment.
3. Variable angle adjustment. Changing the installation angle of the blade can change the performance of the pump to achieve the purpose of changing the operating point of the submersible pump. This way of changing the operating point is called the variable angle adjustment of the pump.
4. Throttling adjustment. For the water pump device in which the gate valve is installed in the outlet pipe, when the gate valve is closed for a small time and the local resistance is increased in the pipeline, the pipeline characteristic curve becomes steep, and the operating point moves to the upper left along the Q-H curve of the water pump. The smaller the gate valve is closed, the greater the increased resistance and the smaller the flow. This method of changing the operating point of the pump by closing the small gate valve is called throttle regulation or variable valve regulation.
When the small gate valve is closed, the local head loss of the pipeline increases, the pipeline system characteristic curve moves to the upper left, and the pump operating point also moves to the upper left. The smaller the gate valve is closed, the greater the local head loss and the smaller the flow rate. It can be seen that the throttling adjustment not only increases the local head loss, but also reduces the amount of water, which is uneconomical. However, due to its simplicity and ease of use, it is widely used in small water pump devices and pump performance tests.